RIBS     A fast look at the  Sarissa 737

It is an offshore high quality R.I.B. for smooth fast rides and comfortable tourism.

The hull is designed from the U.K. Naval Architect Adam Younger very well known for his designs around the world.

The decks was designed by Mr. TakisSamartzis who with his 20 years experience in the marine field creates very modern boats for leisure and race use.

Τhe design of the hulls are based on the latest technology of the vented steps, convex design for low fuel consumption using small outboards, smooth dry rides and high speeds but always with safety.

The construction of Sarissa boats is performed from high tech materials such as multiaxial fibers, Airex, Kevlar and Carbon.

The tubes of the R.I.B.s are made from Hypalon Neopren material of Pennel Flipo France 1.670 dtex, with rubbing strake and moulded lifeline holders.

Deep V hulls with two vented steps.

Self draining decks.

Underdeck fuel and water tanks.

The R.I.B. has the possibility for installation of electric winch to the bow in the hard nose or to the transom in a special compartment depending on the customer demands.

It is the first R.I.B. that incorporates the Antidive System for great safety during high speed cruising during rough sea conditions.

The boat comes with many standard accessories such as

Standard accessories

Fuel tank of 280 lt.

Fresh water tank of 70 lt. with shower

Electric winch with 35 mt. of chain and anchor type Bruce 5 Kg

Hydraulic steering for 300 HP horsepower

Dual battery system with general switch BOTH/ON/OFF

Electric panel

Full high quality waterproof upholstery

Bow sunbed (1.85 mt. length)

Sport aerodynamic console that can incorporate marine or chemical w.c.

Very sophisticated seats for pilot and co-pilot

Navigation lights

Inox mast

Boarding ladder

Inox/aluminum stand for installation of auxiliary outboard

Fuel filter

Illuminated Compass

Repair kit

Owner’s manual

The owner has the ability to include with a small extra cost  optional accessories such as

Inox A-Frame

Installation of marine W.C.

Teak decking

Two tone colors (tubes and plastic parts)

Full boat cover

Sun tent with inox supports

Front tent with inox supports

Second electric winch with chain and anchor

Specifications     

Overall length                                                             7.37 mt.

Overall width                                                              2.42 mt.

Height of boat                                                             1.20 mt.

Inside width                                                                1.51 mt.

Hull length                                                                  6.40 mt.

Hull width                                                                   1.70 mt.

Maximum payload                                                      640 Kg

Boat weight with std specs                                         800 Kg

Draft in water at rest                                                   0.48 mt.

Hull type:                                                                    Deep ‘V’, convex, double chine

                                                                                    effect, two ventilated steps

Materials used:                                                            GRP, Multiaxial, Biaxial,          

Isopthalic resins & gel-coat

Tube diameter                                                             0.30-0.45 mt.

Tube material:                                                             H/N Pennel Flipo 1.670 dtex

Number of air chambers                                              6

Number of persons                                                      8

Fuel tank:                                                                    280 lt.

Water tank:                                                                 70 lt.

Max horsepower                                                         300 hp

Suggested horsepower                                                200-225 hp

Μin horsepower                                                          200 hp

Engine shaft                                                                XL

Max speed with max horsepower                               60+ Kn

Max speed with min horsepower                                43 Kn

Cruising speed                                                                        38 Kn

Fuel consumption at cruising speed                            1.1-1.5 lt./mile

Deadrise                                                                      24

Design category                                                          ‘C’ or ‘B’

Warranty                                                                     5 years for the boat and the tubes

                                                                                    1 year for the rubbing strake the

                                                                                    Grab handles and the electric

Parts/electronic parts